baserat på 2777 recensioner

Dynacord DSP 260 högtalarcontroller

inga recensioner ännu

Utgången, den här produkten kan inte längre beställas.

Dynacord DSP 260 högtalarcontroller
Produktnr.: 9000-0013-5602 Bax Music Garanti: Denna produkt levereras med 2 års garanti.

Allmänt

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

Why would you need a speaker controller you ask?

Actually, when you use a system that consists of more than one speaker, there's really no getting around a good controller as it determines which part of the frequency range gets sent to different amps to use them (and their properties) at their most effective. Additionally, the acoustic properties of different rooms often demand specific tone adjustments. Dynacord's DSP 260 is a processor that can handle all of these adjustments in a very clear way. The sound quality of this controller is nothing short of excellent thanks to its 24-bit A/D and D/A conversion.

A very user-friendly processor

You can alter numerous settings from the front panel of the DSP 260, but you will have the most insight when you use the included software. Dynacord put careful thought and consideration into the location of the USB port - it's on the front - allowing you to alter settings easily without looking for a connection in the back of a dark rack. The DSP 260 has presets for all Dynacord speakers, allowing you to easily configure your set, creating a different preset for each speaker setup.

Specifikationer

Produktfunktioner

Control via app no
Control via PC no
Number of speaker processor inputs 4
Number of speaker processor outputs 6
Delay possible yes

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning) 5,9 kg
Mått (inkl. förpackning) 63,0 x 45,0 x 15,0 cm

Produktspecifikationer

  • speaker management for active speakers
  • inputs: 2x XLR balanced and 2x XLR Thru output
  • digital input: XLR AES/EBU
  • nominal input voltage: 1.23 V/+4 dBu
  • maximum input voltage: 8.7 V/+21 dBu
  • input impedance: 10 kOhms
  • A/D conversion: 24 bits
  • outputs: 6x XLR (balanced
  • nominal output voltage: 1.23 V/+4 dBu
  • maximum output voltage: 8.7 V/+21 dBu
  • output impedance: 50 ohms
  • D/A conversion: 24-bit
  • frequency response: 10 Hz - 22 kHz
  • total harmonic distortion: < 0.01%
  • dynamic range: 111 dB
  • other connections: USB and 9-pin DUSB
  • signal processing:
  • sample rate: 48 kHz
  • data format: 24-bit
  • internal processing: 32-bit Floating Point
  • dimensions: 483 x 356 x 44.45 mm
  • weight: 4.6 kg
En recension kan inte längre skrivas om denna artikel

Det finns ännu inga recensioner för denna produkt.
Beskrivning Typ Språk Förlängning
Technische informatie Okänd

Övriga produkter från Dynacord

Hitta alla produkter från märket Dynacord

Alternativa produkter från andra varumärken

Sök alla produkter i kategorin Högtalare management processor

Peavey VSX 48e Speaker Processor

I lager
Föreslaget pris 6 443,00 kr 6 427,00 kr

Peavey VSX 26e Speaker Processor

I lager
Föreslaget pris 5 031,00 kr 5 018,00 kr