Vindskydd till mikrofon

This set of three beige Samson windscreens is suitable for the SE10 and SE50 headset microphone by Samson.

With this Samson WS Color set you can always distinguish between your microphones. These wind screens were made to fit QV, QE and QV10E headset microphones and are available is several colours.

This Samson windscreen is suitable for the SE50 Black headset microphone by Samson.

The WS1C bundle by Samson consists of five universal windshields in the colours blue, yellow, red, orange and black. These windscreen attenuate plosives and wind noise and fit on any type of mic.

The Zoom WSU-1 is a universal windscreen that fits the H1, H2n, H4n and H6 handheld recorders, as well as the IQ5 microphone and the Q2HD handheld video recorder.

Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.

No longer will wind and noise ruin the use of your lavalier microphone, thanks to this Rycote windscreen! The Lavalier Foam Windscreen is designed specifically for slim lavalier microphones with a diameter of 4.5 mm.

Make sure that there's no need to worry about the life span of your AirLine transmitter with this AH1 sweat cap. It keeps sweat and moisture out of the transmitter, providing you with full outdoor mobility as well!

The cap can easily be mounted and Samson recommend that you dry it after each use.

The Samson WSQE is specifically designed for the Qe aerobics headset microphone.

The Samson WSQV is a specifically designed windscreen for the QV and QV10E aerobic headsets.

Keep annoying wind noises out of your recordings. This WS1 is designed for handheld microphones and will therefore fit countless models. Easy to fit, but it creates a large difference!

This kit features all the accessories you need to mount your Sony PCM D50 on a (DV) camera, stand or boom arm, so you can use it - even outdoors - without handling or wind noise tainting your recordings.

The Zoom RJQ-4 - an indispensable accessory when you're recording outside - is a rain cover and windscreen for the Q4 audio/video recorder. Please note, however, that it's water-resistant, not waterproof.

The Shure A89MW-JMR is a windjammer with the characteristic deadcat look. It is made of fake fur and ensures an attenuation of about 10 dB for the Shure VP89M shotgun microphone.

This DAP Audio DWT-01 is a wind screen that protects your recordings from wind and breathing noises.

The Minifur-LAV windshields are delivered in a set of 3 units. These are fit for Rode’s Lavalier tie-clip microphone.