▾

ENGL E610 Savage 120 Head 120W rörförstärkartopp

Utgången, den här produkten kan inte längre beställas.

Inga alternativ hittades

Produktinformation
Recensioner (1)
Nedladdningar (1)

ENGL E610 Savage 120 Head 120W rörförstärkartopp
Produktnr.: 9000-0005-1446 Bax Music Garanti: Denna produkt levereras med 2 års garanti.

Allmänt

The legendary ENGL E610 Savage 120 head offers 4 versatile channels with 120 watts of vintage KT88 tube sounds ranging from clean to crunch to hi-gain leads. It has 2 FX loops and various MIDI switchable functions!

ENGL E610 Savage 120 channels

The ENGL Savage 120 has four channels: clean, crunch 1, crunch 2 and lead. Each channel has its own gain and volume control. Clean and crunch 1 share a 3-band EQ and single tone-shaping options such as Sensitivity, Bright, Preshape and Contour. These channels are ideal for warm, sparkling cleans and low-gain to classic rock overdrive. Crunch 2 and Lead are more suitable for heavier rock. They also share a 3-bands EQ as well as a special Hi-Balance control and a unique Rough/Smooth function for two different overdrive sounds, resulting in six sounds in total!

Practical functions

The Savage 120's master section consists of two master volume controls and two different volume levels that you can adjust per channel, which is ideal for a solo boost. It also features two separate presence controls with switchable Depth Boost. Connect an optional ENGL MIDI interface or an ENGL Z-10 footswitch to the MIDI interface port and you can toggle via MIDI between channels, Rough/Smooth, Master A/B and Presence A/B. Finally, the Savage 120 has two FX loops (for clean/crunch1 and crunch2/lead separate or as one master FX loop) and an XLR line output for connecting to a PA installation or recorder.

Specifikationer

Produktfunktioner

Anslutningar	Externa högtalare, Fotswitch, Line-out
Antal kanaler	4
Antal högtalarutgångar	5
Förstärkarmodellering	nej
Effektloop	ja
Vikt	16 - 20 kg
Impedans högtalarutgång	16 Ohm, 8 Ohm, 4 Ohm
Inbyggd stämapparat	nej
Inbyggda effekter	inga
Färg	svart
Effektdämpare	nej
Typ av förstärkare	rör
Typ slutstegsrör	KT88
Watt	101 - 150 Watt

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning)	20,0 kg
Mått (inkl. förpackning)	Än så länge okänt

Produktspecifikationer

ENGL guitar amp head
amplifier type: tube
number of channels: 4, Clean, Crunch 1, Crunch 2, Lead
power: 120 W
preamp tubes: 5x ECC83
power amp tubes: 1x ECC83, 2x KT88 (6550)
ECS (Emergency Circuit System) prevents amp from defective tubes
4x versatile channels with individual gain and volume controls
shared bass, middle and treble for Clean/Crunch 1 channel
Sensitivity, Bright, Preshape and Contour functions for Clean/Crunch 1 channel
Sensitivity: controls input sensitivity (Hi for more overdrive, Low for more cleans)
Bright: boost higher frequencies for more clarity and sparkle
Preshape: boosts the low and high , filters the mids in the 300 - 1200Hz range
Contour: boosts the mids from 1200Hz and higher, filters the lower mids
shared bass, middle, treble and hi balance for Crunch 2/Lead channel
Lead Boost, Contour and Rough/Smooth functions for Crunch 2/Lead channel
Hi Balance: boosts or filters the high frequencies in relation to Lead Treble
Hi Balance functions only in Smooth mode
Lead Boost: extra distortion for Lead channels with emphasis on the low
Contour: boosts the mids from 1200Hz and higher, filters the lower mids
Rough/Smooth: 2 unique overdrive characters, lots of high and low or lots of mids and less high
2x master volumes for two different volume levels per channel
Master A/B swtich via optional Z-4 footswitch or MIDI interface Z-7
2x Presence controls with switchable Depth Boost
Presence A/B switch via optional Z-4 footswitch or MIDI-interface Z-7
2x passive FX loops with dry/wet balance control for series or parallel
1x master FX loop or 1 FX loop per main channel (Clean/Crunch1 or Crunch2/Lead)
MIDI interface port (Sub D, 25-pin) for ENGL MIDI interface or Z-10 Custom Footswitch
footswitch input 1: stereo jack (channel 2/2 and Clean/Crunch)
footswitch input 2: stereo jack (Crunch 2/Lead en Rough/Smooth)
footswitch input 3: stereo jack (master A/B and Presence A/B)
balanced frequency-compensated XLR line output for mixer or PA
speaker outputs: 2x 4 ohms, 2x 8 ohms, or 1x 16 ohms
attractive red lighting behind tubes
robust housing with black tolex covering
silver-coloured front panel, horizontal steel tubes and brushed metal ENGL logo
dimensions: 710 x 270 x 270 mm
weight: 19 kg

MIDI switchable functieons (via MIDI interface port):

Channel 1/2
Clean/Crunch 1
Crunch 2/Lead
Rough/Smooth
Presence A/B
Master A/B

En recension kan inte längre skrivas om denna artikel

Recensioner från andra länder

Översätt alla recensioner till svenska Visa den ursprungliga recensionen

F B. 4 augusti 2016

Skrev följande om ENGL E610 Savage 120 Head 120W rörförstärkartopp

Heb deze versterker nu al een tijdje. Heerlijk veelzijdig met een goede clean sound op kanaal 1 en high gain op kanaal 4.

Kanaal 2 en 3 gebruik ik weinig, kanaal 2 is een kleine revoicing van kanaal 1 en kanaal 3 heeft te weinig ballen. Ik gebruik deze head in combinatie met de Engl 2x12 cab.

Minpuntjes: gedeelde EQ voor kanaal 1+2 en kanaal 2+3, lead boost niet te schakelen met footswitch.

Let op wordt niet geleverd met footswitch, je kan switchen met een Z-10.