Eurolite KLS-801

Utgången, den här produkten kan inte längre beställas.

Inga alternativ hittades

Eurolite KLS-801
Produktnr.: STKE-42109851 Bax Music Garanti: Denna produkt levereras med 2 års garanti.

Allmänt

The immense success of the KLS-800 has made room for the creation of a successor: the KLS-801. It still has the compact design and the sublime colour mixing of its predecessor, but it has four extra power connectors.

The TCL technology behind the KLS-801
TCL stands for Tri Colour LED. This special technology ensures sublime colour mixing. A red, green and blue diode have been placed near one another. In front of them is a honeycomb lens. This means that the colour mixing has been taken care of directly from the source. Normal LED pars only mix their colours halfway through the light beam which looks quite ugly when you are looking into the beam. The KLS-801 provides the same colour on the floor or wall as in the spot.

The set is equipped with 28 TCL modules, 7 per spot. This produces a light yield that is equal to a set of 300 Watt pars. The main difference is that the KLS-801 has a lot more advantages. The spots are mounted per four to an electronic dimmer bar, giving the spots the freedom to move and keeping them compact. The LED technology ensures that no large dimmers are needed.

Countless advantages of LED at an attractive price
Where you can usually only fit one set of pars, you can fit two or three of these. The energy consumption is minimal, so you won't have to do difficult calculations involving capacity. The heat emission is also minimal. The LEDs give off hardly any heat and the life span of the LEDs is phenomenal. LEDs will last you a very long time.

This LED set is also equipped with four additional IEC power points on the dimmer bar. This means that you can easily add a few light effects. In your light bridge this allows for the handy connection of scanners, for instance.

Tips eller kommentarer om den här produkten

- The KLS-801 has four additional 230V power points via pre-mounted cables with IEC connectors. Ideal for scanners, DMX-controlled light effects etc.
- Please note: no stand included!

Specifikationer

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning)	12,0 kg
Mått (inkl. förpackning)	126,5 x 41,0 x 12,5 cm

Produktspecifikationer

- very compact, but complete LED lighting set
- equipped with 28 TCL RGB LED modules
- perfect colour mixing, even if you look straight into the fixture
- colours are already mixed in the fixture via special lenses
- every spot can be controlled individually via DMX
- 4-pedal foot controller optional; pre-set, sound-controlled, freeze, blackout
- DMX control via almost any random DMX controller on 15 channels
- equipped with 28 3x1W TCL RGB LED modules
- the close placement of the diodes on the chip allow for accurate colour mixing
- sound-controlled mode via built-in microphone
- stroboscope effect
- auto-mode with built-in program
- master/slave function
- compact dimensions, can be transported in any car
- 2 or 3 sets take up the same space as a T4 with normal par cans
- ideal for installation on a lighting stand
- stand not included
- handy transport bag included
- equipped with four additional IEC power points
- power points fit for light effects (DMX or otherwise)
- mains voltage: 230V AC 50 Hz
- power consumption: 160W
- beam angle LEDs: 30 degrees
- dimensions bar and spots: 1,200 x 65 x 315 mm
- dimensions accessory case: 1,250 x 120 x 380 mm
- weight: 9 kg
- weight package: 12.75 kg

En recension kan inte längre skrivas om denna artikel