DAP ZA-150 Power-Amp 100V 150W met 5 inputs en 4 zones

Allmänt

The DAP ZA-150 is a 100V amplifier that produces no less than 150 watts of power, which can be distributed over 4 switchable zones. To connect your own line devices or microphones, 5 audio inputs are provided. This amplifier is equipped with everything that is required to function at the centre of a professional broadcasting installation.

Multifunctional

The DAP ZA-150 is provided with 4 XLR/Jack combo inputs, which are all equipped with 48 volts of phantom power so that high-quality condenser microphones can also be plugged into them. An RCA input lets you connect an MP3 player or laptop for background music. All inputs signals can be sent to 4 different zones, which can be separately turned on or off without influencing any other zone. The amplifier also has a full-fledged module for telephone paging. To this module you can connect a paging microphone, which can be used at a reception, for instance.

Operation

Such a wide range of options might produce an unclear layout on the amplifier, however, DAP have made it so that you only need one look at the front to get all the information you need. This control panel has a very clear layout, so that you can easily operate the amplifier. The volume can be adjusted for each of the 5 inputs, as can the total master volume. Via the priority button you can give precedence to the first input over the other inputs. To make your audio sound as good as possible, you can also fine-tune the high and low frequencies.