▾

Behringer Europower EPX2800

inga recensioner ännu

Utgången, den här produkten kan inte längre beställas.

Inga alternativ hittades

Behringer Europower EPX2800
Produktnr.: B-000-ABA Bax Music Garanti: På denna produkt lämnas 3 års garanti (vid registrering hos Behringer inom 90 dagar efter köp). Utan registrering lämnas 2 års garanti.

Allmänt

Power amplifiers have always been heavy, and it's really no wonder, given their large transformers and heat sinks. With the coming of the digital age though, the technology is available to change all that, and that's exactly what Behringer has done with their EPX amplifiers, which are based on the revolutionary switch-mode power supply technology. Such technology means that these amplifiers weigh 40% less than their conventional counterparts, which means no more lugging around heavy transformers!

Europower EPX2800: lightweight and reliable

The EPX2800 and EPX4000 weigh no more than 10.1 kg, which makes transporting them anything but back-breaking work. Perhaps best of all though, is the reliability of the EPX amplifiers. They offer an even tighter bass reproduction than their predecessors, because they can handle high peak powers.

EPX amps: a class of their own

The secret of the impressive power/weight ratio of the EPX series is the use of switch-mode power, combined with class H topology. What that means, is that these amps only use power when necessary, so they're not continuously running on full power. This makes them much more efficient than conventional power amps, not to mention smaller and lighter.

Tips eller kommentarer om den här produkten

Specifikationer

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning)	13,2 kg
Mått (inkl. förpackning)	60,1 x 48,7 x 15,2 cm

Produktspecifikationer

amplifier
2x 1,400 W at 2 ohms; 2x 800 W at 4 ohms, 2,800 W at 4 ohms (bridged)
ATR (Accelerated Transient Response) technology
ultra-lightweight with very little self-noise due to efficient switch-mode power supply
switchable limiters with reliable overload protection
detented gain controls
precise LEDs for power, signal and limit
XLR, 6.3 mm TRS and RCA input connectors
professional speaker connectors and 'touch-proof' binding posts
built-in subwoofer/satellite crossover
independent DC and thermal overload protection on each channel
&back-to-front' ventilation system including air filter
fully steel, 2U rack-mountable chassis
RMS power stereo, 8 ohms per channel: 350 W
RMS power stereo, 4 ohms per channel: 600 W
RMS power stereo, 2 ohms per channel: 990 W
RMS power bridged mono, 8 ohms: 1,220 W
RMS power bridged mono, 4 ohms: 2,000 W
peak power stereo, 8 ohms per channel: 440 W
peak power stereo, 4 ohms per channel: 800 W
peak power stereo, 2 ohms per channel: 1,400 W
peak power bridged mono, 8 ohms per channel: 1,620 W
peak power bridged mono, 4 ohms per channel: 2,800 W
controls front panel: power switch, input sensitivity (channel 1 and 2)
control rear panel: crossover switch, mode switch, limiter switch
power indicator: blue LED
limit indicator (per channel): blue LED
signal indicator (per signal): white LED (-20 dB, -10 dB, 0 dB)
input connectors: balanced XLR, 6.3 mm TRS, RCA
input sensitivity: 1.3 dBu
input impedance: 10 kOhms unbalanced, 20 kOhms balanced
output connectors: shielded binding posts, professional speaker connectors
output circuitry type: class H
distortion: 0.05%
frequency response: 20 Hz - 20 kHz, +0 / -1 dB
amplification voltage: 35 dB
damping factor: > 300 @ 8 ohms
signal/noise ratio: 100 dB
cooling system: continuous fan with variable speed, back to front air flow
amplifier protection: against short-circuiting, heat and HF
overload protection: mute for on and off switching, switches off in case of DC defect
power connector: standard IEC
max. power consumption: 4,500 W
operative voltage: 230 V ~, 50 Hz (T 10 A H 250 V)
dimensions: 483 x 88 x 373 mm
weight: 10.1 kg