baserat på 2777 recensioner

Neunaber Audio Seraphim Shimmer V2 Reverb Effects Pedal

inga recensioner ännu

Utgången, den här produkten kan inte längre beställas.

Inga alternativ hittades
Neunaber Audio Seraphim Shimmer V2 Reverb Effects Pedal
Produktnr.: 9000-0105-9069 Bax Music Garanti: Denna produkt levereras med 2 års garanti.

Allmänt

Like a guitar-based pontiff, the audacious Neunaber Audio Seraphim Shimmer V2 Reverb pedal grants direct access to everything from ultra-rich reverb to angelic and imposing choir-like effects. Whether you're seeking the purity of light, sparkling reverb or want to fit your guitar sound with a set of synth-pad-style wings, the Shimmer 2 places everything within your grasp. Hit the footswitch and twist the left control pot to swing from the sound of the Original Shimmer and the sweet and fresh W3T - first made famous by the Wet Reverberator plugin and Immerse Mk II stompbox.

The Neunaber Seraphim Shimmer V2: Two Angelic Reverbs from the Upper Realms

Hold the switch again and twist the right control pot to dictate whether the reverb tail will naturally die out or get brutally cut off as soon as the pedal is deactivated. Release the switch and use the left and right control pots to dial in the depth and shimmer intensity before hitting the sweet spot between the dry and effected sound via the Mix pot in the middle. You can even toggle the sparkling layer of shimmer on and off by holding the footswitch down for a full second and vary the output to glittering effect. All of this is offered via a noise-free, dry analogue signal backed up by zero-latency.

Tips eller kommentarer om den här produkten
  • Please note: A power supply does not come included with this pedal.

Specifikationer

Produktfunktioner

Adapter medföljer ja
Center negativ/positiv centernegativ
Sustainable product not specified
Minipedal nej
Stereoutgång nej
Tap-tempo funktioner nej
True bypass nej
Typ av adapterkontakt barrel 2,1 mm
Typ av reverb övriga reverb
Batteriförsörjning möjligt nej
Voltage 9V, 12V

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning) 310 gr
Mått (inkl. förpackning) 18,0 x 16,0 x 5,5 cm

Produktspecifikationer

  • Neunaber Audio reverb pedal
  • model: Seraphim
  • effect type: original shimmer, W3T shimmer
  • buffered bypass
  • analogue dry signal for low noise and zero latency
  • seamless switching between shimmer and reverb via footswitch
  • controls:
    • mix
    • depth/effect
    • shimmer/trails
  • switches:
    • bypass / rvb | shim
  • connections:
    • 6.35mm jack input
    • 6.35mm jack output
  • power: 9V battery or 12V power supply (not included)
  • power consumption: 100mA
  • nominal input level: -10dBV, instrument level
  • input impedance: 1MΩ
  • frequency response: 20 Hz ~ 30 kHz, ±1dB
  • total harmonic distortion: 0.01%
  • dimensions: 115 x 64 x 46mm
  • weight: 190g
  • made in the USA
En recension kan inte längre skrivas om denna artikel

Det finns ännu inga recensioner för denna produkt.
Beskrivning Typ Språk Förlängning
Seraphim quick start guide Manual engelska

Alternativa produkter från andra varumärken

Sök alla produkter i kategorin Reverb & delay