Mitt konto

SPL Phonitor 2 hörlursförstärkare

5 / 5

Utgången

Den här produkten kan inte längre beställas

Specifikationer

Produktfunktioner

19 tums rackformat: Ej tillämpbart
Energikälla: El
Inbyggd EQ: Nej
Talkback-funktion: Nej

Vikt och mått inkluderar förpackning

Vikt: 5,0 kg
Mått: 54,0 x 38,0 x 19,0 cm

Produktspecifikationer

high-end studio headphone amplifier
suitable for all headphone systems and impedances from 10 Ohm
speaker simulation via headphones
monitoring alternative for studios and mobile units
adjustment of centre point and stereo image
large volume knob
built-in monitor controller
adjust volume via remote control (not included)
compensation for difference in panning levels
line inputs: 2x stereo XLR inputs, 1x stereo RCA input
monitor/line output: stereo XLR output
front-mounted headphone output
voltage: 230 V, 50 Hz / 120 V, 60 Hz
energy usage: max. 23.7 VA
fuses (200-240 V): T 630 mA
fuses (100-120 V): T 1 A
dimensions: 12.6 x 4.4 x 13.4" (277 x 305 x 99 mm)
weight: 9.5 lb (4.3 kg)

inputs:

monitor output 1: 2x 3-pin XLR, balanced
monitor output 2: 2x 3-pin XLR, balanced
impedance: 20 kOhm symmetrical, ca. 10 kOhm asymmetrical
maximum input level: : 32.5 dBu
configuration: pin 1 = GND, pin 2 = positive (+), pin 3 = negative (-)
monitor output 3: 2x RCA, unbalanced
configuration: tip = positive, shield = GND

monitor/line outputs:

connector: 2x 3-pin XLR, balanced
frequency range (-3 dB): 4 Hz to 480 kHz
CMR: -82 dBu
crosstalk @ 1 kHz: -106 dB
THD @ 1 kHz: 0.00085 %
dynamic range: 134.37 dB

headphone output:

connector: 1/4" (6.3mm) stereo jack (TRS)
configuration: tip = left, ring = right, sleeve = GND
impedance: 0.18 ohms
frequency range (-3 dB): < 10 Hz tot > 480 kHz
CMR: -106 dBu
crosstalk @ 1 kHz: -106 dB
THD @ 1 kHz: < 0.00091 %
dynamic range: 133.62 dB
max. output level (@ 1 kHz and 600 Ω): 65 mW (20 dBm)
max. output level (@ 1 kHz and 40 Ω): 560 mW (20 dBm)

Inga alternativ hittades

Specifikationer

Produktfunktioner

19 tums rackformat: Ej tillämpbart
Energikälla: El
Inbyggd EQ: Nej
Talkback-funktion: Nej

Vikt och mått inkluderar förpackning

Vikt: 5,0 kg
Mått: 54,0 x 38,0 x 19,0 cm

Produktspecifikationer

high-end studio headphone amplifier
suitable for all headphone systems and impedances from 10 Ohm
speaker simulation via headphones
monitoring alternative for studios and mobile units
adjustment of centre point and stereo image
large volume knob
built-in monitor controller
adjust volume via remote control (not included)
compensation for difference in panning levels
line inputs: 2x stereo XLR inputs, 1x stereo RCA input
monitor/line output: stereo XLR output
front-mounted headphone output
voltage: 230 V, 50 Hz / 120 V, 60 Hz
energy usage: max. 23.7 VA
fuses (200-240 V): T 630 mA
fuses (100-120 V): T 1 A
dimensions: 12.6 x 4.4 x 13.4" (277 x 305 x 99 mm)
weight: 9.5 lb (4.3 kg)

inputs:

monitor output 1: 2x 3-pin XLR, balanced
monitor output 2: 2x 3-pin XLR, balanced
impedance: 20 kOhm symmetrical, ca. 10 kOhm asymmetrical
maximum input level: : 32.5 dBu
configuration: pin 1 = GND, pin 2 = positive (+), pin 3 = negative (-)
monitor output 3: 2x RCA, unbalanced
configuration: tip = positive, shield = GND

monitor/line outputs:

connector: 2x 3-pin XLR, balanced
frequency range (-3 dB): 4 Hz to 480 kHz
CMR: -82 dBu
crosstalk @ 1 kHz: -106 dB
THD @ 1 kHz: 0.00085 %
dynamic range: 134.37 dB

headphone output:

connector: 1/4" (6.3mm) stereo jack (TRS)
configuration: tip = left, ring = right, sleeve = GND
impedance: 0.18 ohms
frequency range (-3 dB): < 10 Hz tot > 480 kHz
CMR: -106 dBu
crosstalk @ 1 kHz: -106 dB
THD @ 1 kHz: < 0.00091 %
dynamic range: 133.62 dB
max. output level (@ 1 kHz and 600 Ω): 65 mW (20 dBm)
max. output level (@ 1 kHz and 40 Ω): 560 mW (20 dBm)

Produktinformation

Produktnr.: 9000-0009-1911

Allmänt

Finally, a worthy monitor sound on your headphones with the Phonitor 2 from SPL. The high-end headphones preamp simulates the exact stereo studio sound on your headphones. You can adjust the centre point, the cross feed and the angle of the speaker. Next to that, the SPL Phonitor 2 can also be used as monitor controller, so you can switch between three audio sources.

Phonitor 2: suitable for every type of headphones

The SPL Phonitor 2 is suitable for every type of headphones with a high impedance sound full and powerful. It is optimized for headphones with an impedance of about 40 ohms. You can use any infrared remote control operate the headphone preamp, making it ideal for audiophiles who want to enjoy their music without getting up from their chair.

Servicelöfte

Bax Music Garanti Denna produkt levereras med 2 års garanti.

Denna produkt levereras med 2 års garanti.

Recensioner (1)

5,0

1 omdöme

Betyg

5 stjärnor 1 4 stjärnor 0 3 stjärnor 0 2 stjärnor 0 1 stjärna 0

En recension kan inte längre skrivas om denna artikel

Recensioner från andra länder

5 / 5