baserat på 2777 recensioner

JB systems DSPA-1000 förstärkare

inga recensioner ännu
JB systems DSPA-1000 förstärkare

Utgången

Den här produkten kan inte längre beställas

Specifikationer

Produktfunktioner

19 tums rackformat
2 U
2 ohm kompatibel
Ja
Antal kanaler förstärkare
2
Ljudslinga utgång
Ja
Stalläge
Ja
Kontakt ingång
Jack (6,3 mm), XLR
Inbyggt filter
HPF, LPF
Inbyggda skydd
överbelastning, termiskt , kortslutning, fyrkantsvågor/likspänning, peak limiter, clip indikator
Inbyggd DSP-processor
Ja
Kylning
Fläkt
RMS effekt (4 ohm) per kanal
500 - 599 Watt
RMS effekt (8 ohm) per kanal
300 - 349 Watt
Förstärkarklass
D
Förstärkarutgång
Låsbar högtalaranslutning, trådklämma
Försedd med crossover
Nej

Vikt och mått inkluderar förpackning

Vikt
5,0 kg
Mått
57,0 x 45,0 x 17,0 cm

Produktspecifikationer

  • professional amplifier
  • 19-inch rack-mountable, 2 U
  • lightweight design
  • double Class D amplifier module
  • temperature-controlled fan cooling
  • operating modes: stereo / bridge / input Y
  • built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
  • crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
  • peak limiter prevents signal distortion and overloading
  • protection against the negative effects of DC, overheating, overloading and short-circuiting
  • frequency range: 20 - 20,000 Hz
  • signal/noise ratio > 100 dB
  • power stereo bridged 2 ohms: 2x 750 W
  • power stereo 4 ohms: 2x 500 W
  • power stereo bridged 8 ohms: 2x 300 W
  • power stereo bridged 8 ohms: 1x 1000 W
  • power stereo bridged 4 ohms: 1x 1,500 W
  • dimensions: 482 x 88 x 280 mm
  • weight: 4.9 kg

Connectors:

  • audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
  • speaker outputs: 2x screw terminals / 2x lockable speaker connectors

Inga alternativ hittades

Specifikationer

Produktfunktioner

19 tums rackformat
2 U
2 ohm kompatibel
Ja
Antal kanaler förstärkare
2
Ljudslinga utgång
Ja
Stalläge
Ja
Kontakt ingång
Jack (6,3 mm), XLR
Inbyggt filter
HPF, LPF
Inbyggda skydd
överbelastning, termiskt , kortslutning, fyrkantsvågor/likspänning, peak limiter, clip indikator
Inbyggd DSP-processor
Ja
Kylning
Fläkt
RMS effekt (4 ohm) per kanal
500 - 599 Watt
RMS effekt (8 ohm) per kanal
300 - 349 Watt
Förstärkarklass
D
Förstärkarutgång
Låsbar högtalaranslutning, trådklämma
Försedd med crossover
Nej

Vikt och mått inkluderar förpackning

Vikt
5,0 kg
Mått
57,0 x 45,0 x 17,0 cm

Produktspecifikationer

  • professional amplifier
  • 19-inch rack-mountable, 2 U
  • lightweight design
  • double Class D amplifier module
  • temperature-controlled fan cooling
  • operating modes: stereo / bridge / input Y
  • built-in DSP section with HPF, LPF, 8-band EQ, limiters, delays and crossover
  • crossover: Linkwitz-Riley, 24 dB/oct, 50 Hz - 3.15 kHz
  • peak limiter prevents signal distortion and overloading
  • protection against the negative effects of DC, overheating, overloading and short-circuiting
  • frequency range: 20 - 20,000 Hz
  • signal/noise ratio > 100 dB
  • power stereo bridged 2 ohms: 2x 750 W
  • power stereo 4 ohms: 2x 500 W
  • power stereo bridged 8 ohms: 2x 300 W
  • power stereo bridged 8 ohms: 1x 1000 W
  • power stereo bridged 4 ohms: 1x 1,500 W
  • dimensions: 482 x 88 x 280 mm
  • weight: 4.9 kg

Connectors:

  • audio inputs: 2x XLR connector / 2x 6.3mm jack connector (link out option)
  • speaker outputs: 2x screw terminals / 2x lockable speaker connectors

Produktinformation

Produktnr.: 9000-0008-2993

Allmänt

Modern times require modern amplification solutions. With the DSPA-1000, JB Systems are providing a very attractive amplifier that combines a lot of power with limited heat production and a very efficient class D amplifier. The amplifier operates effortlessly at 2 ohms and achieves a power of 2x 750 watts RMS. The housing of the DSPA-1000 is rack-ready so that it can be used in fixed installations as well as live racks.

DSPA-1000: full-on DSP section

One look at the front panel of the DSPA-1000 and you know this model does more than just amplify! It features a complete built-in DSP section. In it you will find an HPF (40 - 125 Hz) and an LPF (6.3 kHz - 20 kHz), an 8-band equalizer, two limiters, two delays and a crossover. This way, you'll be able to perfectly fine-tune your PA in any space and the power of the amp can be optimally used.

Applications

What kind of speaker requirements do you have? The DSPA-1000 can drive two satellite speakers (stereo setup), a satellite speaker and a subwoofer (mono setup) and a single satellite speaker (mono). In any case, the amp is protected against overloading, short-circuiting, DC and overheating - so you needn't worry too much about safety! The DSPA-1000 only weighs 5 kg, is modern, efficient (Class D) and extremely versatile.

Bax Music Garanti Denna produkt levereras med 2 års garanti.

Recensioner

En recension kan inte längre skrivas om denna artikel
Det finns ännu inga recensioner för denna produkt.

Nedladdningar

Alternativa produkter från andra varumärken

Sök alla produkter i kategorin Förstärkare