▾

Presonus CDL18S 18 inch actieve subwoofer

inga recensioner ännu

Utgången, den här produkten kan inte längre beställas.

Inga alternativ hittades

Produktinformation
Videor (1)
Recensioner (0)

Presonus CDL18S 18 inch actieve subwoofer
Produktnr.: 9000-0046-5769 Bax Music Garanti: Denna produkt levereras med 2 års garanti.

Allmänt

A superb side-kick for the CDL12 full-range speaker, the Presonus CDL18S 18" active subwoofer can be set up as a line-array but is also compatible with pole mounts. Driven by a 1,000-Watt class-D amplifier, this beastly sub shapes exceptionally tight and coherent lows, while the efficiency is optimised by a unique ported design.

The CDL18s: Dante-Compatible

The CDL18s is compatible with Dante: a low-latency network connection that sound techs the world over have fully embraced. Using Dante, it's possible to use WorxControl, which gives you various tools to dial in speakers and subs in minute detail.

Tips eller kommentarer om den här produkten

If you're a student or ordering for a school then you can get 10% off all Presonus hardware! Interested? Contact our helpdesk for more information!

Specifikationer

Produktfunktioner

Anslutningar högtalare	XLR in, ut/länk/genom, Nätverk
Diameter woofer	18 tum
Sustainable product	not specified
Vikt per högtalare	48 kg
Maximal SPL	130 dB - 139 dB
Maximal subwoofer frekvens	150 Hz
Minimal frekvens	35 - 39 Hz
RMS-effekt i watt	500 - 749 Watt
Låsbar högtalaranslutning	ja

Vikt och mått inkluderar förpackning

Vikt (inkl. förpackning)	65,0 kg
Mått (inkl. förpackning)	125,5 x 45,0 x 9,0 cm

Produktspecifikationer

Presonus CDL18s
active subwoofer
pole-mount / line-array
frequency range: (-3 dB) 42 Hz - 150 Hz (variable)
frequency range: (-10 dB) 36 Hz - 144 Hz
maximum SPL: 135 dB
crossover frequency: 90Hz
18" transducer with 4" voice coil
amplifier: class-d
power capacity: 2,000W peak, 1,000W program (500W RMS)
LF power capacity: 2,00W peak, 1,000W program (500W RMS)
cooling: convection
nominal THD: <0.05% (20 Hz - 20 kHz)
dynamic range: 119 dB (A-weighted)
bandwidth: 20 Hz - 20 kHz
power supply: PowerCon I/O
power: 90-260V, 50-60 Hz
input channels: 1
input: XLR
impedance: 40 kOhm
max. input: +4 dBu
output: direct line out (XLR)
network: Dante (Audio and Control), control (only) via Locking Ethernet
on-board controls: preset selection, filter on/off
indicators: overheating, signal, -3dB, limiter, clip and networks status
effects: compressor, limeter, delay, 8-band EQ and preset selection via WorxControl
bit depth: 24-bit
sample frequency: 48kHz
material: 15mm eucalyptus plywood
finish: Chemline Polyurea
grille: steel, powder coating
dimensions: 590 x 529 x 610mm
weight: 47.6 kg